Differences

This shows you the differences between two versions of the page.

--- documents:afr-500:afr500operating [2023/03/09 11:14]
rocky [9.1 POWER WIRING]
+++ documents:afr-500:afr500operating [2023/03/22 13:38] (current)
rocky [3.3 Interface options]
@@ Line 28: / Line 28: @@
 As an AFR system the AFR-500 offers the ability to be used as a single device or one unit per bank on a "V" type engine. Although in dual bank operating mode there are two AFR-500 boards, there is a single interface and system integration. In addition to the two terminal boards an ACM-4000 is recommended for connecting the units and providing display functionality.
+===== - UPDATING FIRMWARE =====
+Follow this link to our [[https://github.com/Altronic-LLC/Altronic-Public-Files/tree/main/AFR-500_Firmware_Releases|Public GitHub]] with the latest firmware and how to update the device.
 ===== - Connecting to The System =====
@@ Line 53: / Line 55: @@
 <html>
-Click here for <font size="5.5"><a href="https://staging.altronic.a2hosted.com/doku.php?id=documents:awi:awi_connection/">AWI CONNECTION AND INTERFACE MANUAL</a></font>
+Click here for <font size="5.5"><a href="https://www.altronic.a2hosted.com/doku.php?id=documents:awi:awi_connection/">AWI CONNECTION AND INTERFACE MANUAL</a></font>
 </html>
@@ Line 548: / Line 550: @@
   * Non-latching registers that when mapped to the AWI appear as an LED and turn off after the fault condition has cleared
   * Latching registers that when mapped to the AWI will appear as an LED and stay on even after the thermocouple is no longer in the fault condition
-  * A digital output signal attached to Digital Output 1 that latches on a fault condition
+  * A digital output signal attached to LS Digital Output 1 that latches on a fault condition
 To clear all of the alarms, regardless of a single or dual bank system, there is one ALARM ACKNOWLEDGE register.